Hydraulic Hoses > SAE100-R8 APPLICABLE STANDARD SAE 100 R8 / EN 855 APPLICATION High Pressure hydraulic lines 140 to 350 bar Compact, high pressure, light weight and low change in length Suitable for hydraulic application with increased resistance to abrasion For use with petroleum, synthetic or water based fluids in hydraulic systems suitable for agricultural machinery, earthmoving, safety, rescue and material handling equipment can be used for industrial gases and other application, please consult manufacturer CONSTRUCTION Core : Thermoplastic elastomer Reinforcement : 2 braids of synthetic fiber Cover : Black colour, pin pricked polyurethane Available twin & multi lines with different hose combination and size Also special colors available up to request TEMPERATURE RANGE Continuous : -40°C to + 100°C Temp. not to exceed + 70°C for air and water based fluids DN . 5 6 8 10 12 16 20 25 HOSE I. D. (NOM.) (IN.) 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 (MM) 4.8 6.4 8.0 9.6 12.8 16.1 19.2 25.5 HOSE O. D. (NOM.) (IN.) 0.490 0.635 0.660 0.730 0.890 1.010 1.140 1.420 (MM) 12.4 16.1 16.7 18.5 22.6 25.6 28.9 36.1 WORKING PRESSURE (PSI) 5,000 5,000 4,250 4,000 3,500 2,750 2,250 2,000 (BAR) 350 350 290 280 245 190 155 140 MIN. BURST PRESSURE (PSI) 20,000 20,000 17,000 16,000 14,000 11,000 9,000 8,000 (BAR) 1,400 1,400 1,160 1,120 980 760 620 560 MIN. BEND REDIUS (MM) 40 45 55 65 77 100 140 200 (IN.) 1.6 1.8 2.2 2.6 3.1 4.0 5.6 8.0 Back to Products � 2008. Tushar Hoses Private Limited.